The Process 
Inground Pool

 

1. Site Preparation

Excavation: The area is carefully measured and excavated to match the desired pool shape and depth.

Leveling: The ground is leveled and compacted, ready for the steel structure. 

​​​​​​

2. Installation of Wall Braces 

Positioning:  Steel braces are installed around the perimeter, marking where each panel will be anchored. 

Anchoring: These braces are either bolted into the base  slab or secured using rebar and concrete footings. 

​​​

3. Thermal Insulation: 

Installation: High-density insulation foam is applied to the exterior of the steel walls before backfilling, helping the pool retain heat and reduce energy costs. 

​​

4. Concrete Foundation and Reinforcement 

Base Slab Pour: A reinforced concrete slab is poured within the installed steel wall structure to form the pool floor. This anchors the walls securely from the base up. ​

Wall Reinforcement: Concrete is poured behind the steel walls, fully encasing the base of each panel and locking the entire structure in place. This provides critical structural strength and long-term stability. 

​

5. Liner Installation ​

Custom Fit: The Aqualux vinyl liner, custom-made to the pool’s exact dimensions, is carefully installed and vacuum-sealed to the structure. As the pool fills with water, the liner is pulled tightly against the walls and floor, ensuring a smooth, wrinkle-free finish and a perfect fit.

​​

​

Create Your Perfect Pool – Without Compromise!

​

If you don’t have room for a full-sized pool but still want a place to cool off and unwind, a plunge pool is the ideal choice. Compact yet functional, our custom-made designs can reach up to 7.2m x 3.6m with an average depth of 1.5m—and best of all, no building consent is required.

​

​

​